Product classification
產品規格 | 單位 | HXYD430 | ||||||||
合模單元Clamping Unit |
| |||||||||
合模力Clamping force | kN | 4300 | ||||||||
移動模板行程Moving mould-plate stroke | mm | 690 | ||||||||
最大模厚 Max.Mould height | mm | 780 | ||||||||
最小模厚Min.Mould height | mm | 280 | ||||||||
拉桿有效間距 Space between tie-bars | mm | 760*710 | ||||||||
液壓頂出力Hydraulic ejector force | kN | 197 | ||||||||
液壓頂出行程 Hydraulic ejector stroke | mm | 180 | ||||||||
頂出點數Ejector number | n | 13 | ||||||||
注射單元Injection Unit | I1000 | I1400 | I1600 | |||||||
螺桿直徑Screw diameter | mm | 50 | 55 | 60 | 55 | 60 | 65 | 60 | 65 | 70 |
螺桿長徑比Screw L/D ratio | L/D | 22 | 20 | 20 | 21.8 | 20 | 20 | 21.6 | 20 | 20 |
理論注射容積Injection capacity in theory | cm3 | 471 | 570 | 678 | 665 | 791 | 929 | 791 | 929 | 1078 |
注射重量Injection weight（ps） | g | 428 | 518 | 617 | 605 | 720 | 845 | 720 | 845 | 980 |
注射壓力Injection pressure | MPa | 2178 | 1800 | 1513 | 2142 | 1800 | 1534 | 2114 | 1800 | 1552 |
注射速度Injection velocity | mm/s | 350 | 350 | 350 | ||||||
塑化能力 Plasticizing capacity | g/s | 50 | 60 | 75 | 60 | 75 | 90 | 75 | 90 | 110 |
螺桿轉速 Screw speed | rpm | 400 | 400 | 400 | ||||||
其他Other |
| |||||||||
油泵壓力Pump pressure | MPa | 17.5 | ||||||||
驅動功率 Motor/Driving power | kW | 45(注）+23（熔）+23+23（油） | 45(注）+23（熔）+23+23（油） | 45(注）+23（熔）+23+23（油） | ||||||
加熱功率 Heating capacity | kW | 20.3 | 20.3 | 20.3 | ||||||
外形尺寸 Machine dimension | m | 7.65*1.95*2.26 | 7.65*1.95*2.32 | 7.65*1.95*2.32 | ||||||
機器重量 Machine weight | t | 17.1 | 17.5 | 17.9 | ||||||
油箱容積 Oil tank capacity | L | 690 | ||||||||
您當前所在位置：首頁 < 
